For general information, see the ADCIRC site, ADCIRC FAQ, or the ADCIRC Wikipedia page. For model documentation not yet available on the wiki, see the ADCIRC site. New content is being continuously added to the ADCIRCWiki, and material from the main ADCIRC site will be gradually transitioned over to the wiki.
Fort.15 file format: Difference between revisions
Taylorgasher (talk | contribs) m (fixed link) |
Taylorgasher (talk | contribs) m (→Numerics & Physics: changed NWS link) |
||
Line 64: | Line 64: | ||
'''<code>[[NCOR]]</code>''' - Coriolis control<br/> | '''<code>[[NCOR]]</code>''' - Coriolis control<br/> | ||
'''<code>[[NTIP]]</code>''' - tidal potential forcing control<br/> | '''<code>[[NTIP]]</code>''' - tidal potential forcing control<br/> | ||
'''<code>[[NWS]]</code>''' - meteorological forcing control<br/> | '''<code>[[NWS#Value_Seen_in_fort.15_File|NWS]]</code>''' - meteorological forcing control<br/> | ||
'''<code>[[NRAMP]]</code>''' - forcing ramping control<br/> | '''<code>[[NRAMP]]</code>''' - forcing ramping control<br/> | ||
'''<code>[[G]]</code>''' - acceleration due to gravity<br/> | '''<code>[[G]]</code>''' - acceleration due to gravity<br/> |
Revision as of 15:49, 17 June 2020
The basic file structure of the fort.15 file is shown below. Each line of input data is represented by a line containing the input variable name(s). Inputs in the fort.15 file must be entered in the exact order shown on this page. Blank lines and headings are only to enhance readability. Loops indicate multiple lines of input.
Main Controls
Metadata and Logging
Parameter | Type | Required? | Description | Values |
---|---|---|---|---|
RUNDES
|
32 character string | Always | Run description | Any alpha-numeric |
RUNID
|
24 character string | Always | Run identification | Any alpha-numeric |
NFOVER
|
integer | Always | Non-fatal error override option | 0 or 1 |
NABOUT
|
integer | Always | Logging level | -1, 0, 1, 2, or 3 |
NSCREEN
|
integer | Always | Logging output destination | -1, 0, or 1 |
Numerics & Physics
IHOT
- whether to read a hotstart file
ICS
- coordinate projection to run in
IM
- model run mode
IDEN
- density forcing mode, include this line only if: IM = 20, 21, 30, 31
, or if IM
's last 6-digit entry is > 4 (e.g., 513115
).
NOLIBF
- bottom stress parameterization mode
NOLIFA
- finite amplitude term mode
NOLICA
- advection term mode
NOLICAT
- advection term mode
NWP
- number of nodal attributes
for j=1 to NWP
AttrName(j)
- nodal attributes to use, include this line only if:NWP > 0
end j loop
NCOR
- Coriolis control
NTIP
- tidal potential forcing control
NWS
- meteorological forcing control
NRAMP
- forcing ramping control
G
- acceleration due to gravity
TAU0
- affects numerical diffusion/stability of governing equations
Tau0FullDomainMin Tau0FullDomainMax
- limits on TAU0
, include this line only if:TAU0 = -5.0
.
DTDP
- model time step (seconds) and predictor-corrector control
STATIM
- shifts numeric value of starting simulation time (days)
REFTIM
- shifts reference time for tidal harmonic analysis
Meteorological controls including WTIMINC, RSTIMINC
- include this line: for most cases of NWS ≠ 0
, see linked page for details.
RNDAY
- end time of simulation (days)
Ramping controls including DRAMP, FluxSettlingTime
- include this line only if: NRAMP > 0
, see linked page for details
A00 B00 C00
- time weighting factors in GWCE
H0
- minimum depth, include this line only if: NOLIFA = 0
or 1
H0
INTEGER
INTEGER
VELMIN
- alternate minimum depth controls, include this line only if: NOLIFA = 2
or 3
SLAM0 SFEA0
- longitude and latitude for center of CPP coordinate projection
TAU
- linear bottom friction coefficient, include this line only if: NOLIBF = 0
CF
- quadratic bottom friction coefficient or limit, include this line only if: NOLIBF = 1
CF
HBREAK
FTHETA
FGAMMA
- alternate quadratic bottom friction controls, include this line only if: NOLIBF = 2
ESLM
- horizontal eddy viscosity controls, include this line only if: IM = 0
, 1
, or 2
ESLM
ESLC
- alternate horizontal eddy viscosity controls, include this line only if: IM = 10
CORI
- constant Coriolis coefficient
Periodic (Tidal) Body Forcing
end k loop
Periodic (Tidal) Boundary Elevations
end k loop
for k=1 to NBFR
end k loop
Periodic (Tidal) Boundary Velocities
ANGINN
NFFR - include this line only if IBTYPE = 2, 12, 22, 32 or 52 in the Grid and Boundary Information File
for k=1 to NFFR
end k loop
for k=1 to NFFR
- ALPHA(k)
- for j=1 to NVEL
- QNAM(k,j), QNPH(k,j) - use this line if IBTYPE = 2, 12, 22 in the Grid and Boundary Information File
- QNAM(k,j), QNPH(k,j), ENAM(k,j), ENPH(k,j) - use this line if IBTYPE = 32 in the Grid and Boundary Information File
- QNAM(k,j), QNPH(k,j) - use this line if IBTYPE = 2, 12, 22 in the Grid and Boundary Information File
- end j loop
end k loop
Model Output
NOUTE, TOUTSE, TOUTFE, NSPOOLE
NSTAE
for k=1 to NSTAE
- XEL(k), YEL(k) - use these lines if NSTAE is positive. If negative, stations are listed in the elev_stat.151 file
end k loop
NOUTV, TOUTSV, TOUTFV, NSPOOLV
NSTAV
for k=1 to NSTAV
- XEV(k), YEV(k) - use these lines if NSTAV is positive. If negative, stations are listed in the vel_stat.151 file
end k loop
NOUTC, TOUTSC, TOUTFC, NSPOOLC - include this line only if IM =10
NSTAC - include this line only if IM =10
for k=1 to NSTAC
end k loop
NOUTM, TOUTSM, TOUTFM, NSPOOLM - include this line only if NWS is not equal to zero.
NSTAM - include this line only if NWS is not equal to zero.
for k=1 to NSTAM
- XEM(k), YEM(k) - use these lines if NSTAM is positive. If negative, stations are listed in the met_stat.151 file
end k loop
NOUTGE, TOUTSGE, TOUTFGE, NSPOOLGE
NOUTGV, TOUTSGV, TOUTFGV, NSPOOLGV
NOUTGC, TOUTSGC, TOUTFGC, NSPOOLGC - include this line only if IM =10
NOUTGW, TOUTSGW, TOUTFGW, NSPOOLGW - include this line only if NWS is not equal to zero.
Harmonic Analysis
end k loop
THAS, THAF, NHAINC, FMV
NHASE, NHASV, NHAGE, NHAGV
Hotstart Output and Numeric Controls
NHSTAR, NHSINC
ITITER, ISLDIA, CONVCR, ITMAX
For a 2DDI ADCIRC run that does not use netCDF, the file ends here. For any ADCIRC run that uses netCDF, the lines NCPROJ
through NCDATE
(described in the NetCDF Control section below) are required metadata and must be added at the end of the fort.15 file.
3D Model Run
IDEN
ISLIP, KP
Z0S,Z0B
ALP1,ALP2,ALP3
IGC, NFEN
for k=1 to NFEN (include this loop only if IGC = 0, k=1 at bottom, k= NFEN at surface)
end k loop
IEVC, EVMIN, EVCON
for k=1 to NFEN (include this loop only if IEVC = 0, k=1 at bottom, k= NFEN at surface)
end k loop
THETA1, THETA2(include this line only if IEVC = 50 or 51)
I3DSD,TO3DSDS,TO3DSDF,NSPO3DSD
NSTA3DD
for k=1 to NSTA3DD
end k loop
I3DSV,TO3DSVS,TO3DSVF,NSPO3DSV
NSTA3DV
for k=1 to NSTA3DV
end k loop
I3DST,TO3DSTS,TO3DSTF,NSPO3DST
NSTA3DT
for k=1 to NSTA3DT
end k loop
I3DGD,TO3DGDS,TO3DGDF,NSPO3DGD
I3DGV,TO3DGVS,TO3DGVF,NSPO3DGV
I3DGT,TO3DGTS,TO3DGTF,NSPO3DGT
The following line will be read in if IM is 21 or 31.
RES_BC_FLAG, BCFLAG_LNM, BCFLAG_TEMP
The following two lines will be read in if RES_BC_FLAG is negative.
RBCTIMEINC
BCSTATIM
The following two lines will be read in if RES_BC_FLAG = 2.
RBCTIMEINC, SBCTIMEINC
BCSTATIM, SBCSTATIM
The following two lines will be read in if RES_BC_FLAG = 3.
RBCTIMEINC, TBCTIMEINC
BCSTATIM, TBCSTATIM
The following two lines will be read in if RES_BC_FLAG = 4.
RBCTIMEINC, SBCTIMEINC, TBCTIMEINC
BCSTATIM, SBCSTATIM, TBCSTATIM
The following two lines will be read in if RES_BC_FLAG = 3 or 4 and BCFLAG_TEMP is not equal to 0.
TTBCTIMEINC, TTBCSTATIM
TTBCTIMEINC
The following two lines will be read in only if IM is 21 or 31.
SPONGEDIST
EQNSTATE
The following lines will be read in only if IDEN is > 0.
NLSD, NVSD
NLTD, NVTD
ALP4
The following line will be read in only if IDEN = 3 or 4.
NTF
NetCDF Control
The following lines will be read in only if the NetCDF output or hotstart format is chosen
NCPROJ
NCINST
NCSOUR
NCHIST
NCREF
NCCOM
NCHOST
NCCONV
NCCONT
NCDATE
Namelists
The following Fortran namelist lines are optional, but if they appear, they must appear at the very end of the fort.15 file.
&metControl WindDragLimit=floatValue, DragLawString='stringValue', rhoAir=floatValue, outputWindDrag=logicalValue /
&timeBathyControl NDDT=integerValue, BTIMINC=floatValue, BCHGTIMINC=floatValue /
&waveCoupling WindWaveMultiplier=floatValue /
&SWANOutputControl SWAN_OutputHS=logicalValue, SWAN_OutputDIR=logicalValue, SWAN_OutputTM01=logicalValue, SWAN_OutputTPS=logicalValue, SWAN_OutputWIND=logicalValue, SWAN_OutputTM02=logicalValue, SWAN_OutputTMM10=logicalValue /
&subdomainModeling subdomainOn=logicalValue/
&wetDryControl outputNodeCode=logicalValue, outputNOFF=logicalValue, noffActive=logicalValue /
&inundationOutputControl inundationOutput=logicalValue0, inunThresh =floatValue /
&TVWControl use_TVW=logicalValue, TVW_file='stringValue', nout_TVW =integerValue, touts_TVW =floatValue, toutf_TVW=floatValue, nspool_TVW =integerValue /
&WarnElevControl WarnElev=floatValue, ErrorElev=floatValue, WarnElevDump=logicalValue, WarnElevDumpLimit=integerValue /
&dynamicWaterLevelCorrectionControl dynamicWaterLevelCorrectionFileName='stringValue' dynamicWaterLevelCorrectionMultiplier=floatValue, dynamicWaterLevelCorrectionRampStart=floatValue, dynamicWaterLevelCorrectionRampEnd=floatValue, dynamicWaterLevelCorrectionRampReferenceTime='stringValue', dynamicWaterLevelCorrectionSkipSnaps=integerValue /