For general information, see the ADCIRC site, ADCIRC FAQ, or the ADCIRC Wikipedia page. For model documentation not yet available on the wiki, see the ADCIRC site. New content is being continuously added to the ADCIRCWiki, and material from the main ADCIRC site will be gradually transitioned over to the wiki.
IM is an important parameter in the fort.15 file that defines numerical model formulation and dimension. Among other things, IM specifies whether ADCIRC is solved in two-dimensional depth-integrated (2DDI) or in three-dimensions (3D), solution of the governing equations is semi-implicit or explicit in time, and whether the model formulation is barotropic or baroclinic. Popular values for 2D barotropic ADCIRC include IM=0 and IM=111112, though the latter also requires modifying A00, B00, C00.
Default IM Values
Default simulation option combinations can be specified through single or double digit values, some of which are shortcuts to the six-digit codes described in the next heading. The available IM values are specified below:
|IM Value||Six-digit Equivalent||Description|
|1||611111||Barotropic 3D velocity-based momentum|
|2||-||Barotropic 3D stress-based momentum|
|10||-||Barotropic 2DDI with passive scalar transport|
|11||-||Barotropic 3D velocity-based momentum with passive scalar transport|
|21||611113||Baroclinic 3D velocity-based momentum|
|30||-||Baroclinic 2DDI with passive scalar transport|
|31||-||Baroclinic 3D velocity-based momentum with passive scalar transport|
Note that all default IM values employ the semi-implicit consistent GWCE mass matrix solver. It has less numerical error and tends to be more stable than the explicit mass-lumping approach at the expense of computational time and memory.
Six-digit IM Codes
For fine-grained control of various options six-digit codes for IM can be specified. Each digit represents a specific option regarding the dimension and the formulation of certain terms or integration methods in the GWCE or momentum equations. The available options for each digit are specified below, with the first digit being the left-most:
|Value||Digit 1: 2DDI/3D, Lateral Stress in GWCE||Digit 2: Advection in GWCE||Digit 3: Lateral Stress in Momentum||Digit 4: Advection in Momentum||Digit 5: Area Integration in Momentum||Digit 6: GWCE Mass Matrix, Barotropic/Baroclinic|
|1 (default)||2DDI, Kolar-Gray flux-based||Non conservative||Integration by parts, velocity-based||Non conservative||Corrected||Consistent (implicit for linear part of gravity wave term), barotropic|
|2||2DDI, 2-part flux-based||Conservative form 1||Integration by parts, flux-based||Conservative form 1||Original||Lumped (explicit), barotropic|
|3||2DDI, 2-part velocity-based||Conservative form 2||Integration by parts, velocity-based symmetrical||Conservative form 2||-||Consistent (implicit for full gravity wave term), barotropic
|4||2DDI, 2-part flux-based symmetrical||-||Integration by parts, flux-based symmetrical||-||-||Consistent (implicit for full gravity wave term, modified dispersion relation), barotropic
|5||2DDI, 2-part velocity-based symmetrical||-||2 Part, velocity-based (not implemented)||-||-||Specify a value of 5-8 to do the same as 1-4 (same order) but in baroclinic mode
|6||3D, Kolar-Gray flux-based||-||2 Part, flux-based (not implemented)||-||-||See above|
A common code combination is IM = 111112, which is identical to the default 111111 (same as IM = 0), but simulates in explicit mass-lumping mode. Note that
A00, B00, C00 must be set to
0.0 1.0 0.0 alongside an IM value of 111112. Lumped explicit mode is a useful alternative to the (default) semi-implicit consistent GWCE mass matrix mode, which requires a matrix solve increasing computational time and memory compared to the explicit mass-lumping mode, which as about twice as fast and scales to fewer grid nodes per computational core. Moreover, for model setups that are sufficiently resolved in space and time, differences in the solution between approaches should be negligible.
- K.M. Dresback, R.L. Kolar, R.A. Luettich, Jr. (2005). On the Form of the Momentum Equation and Lateral Stress Closure Law in Shallow Water Modeling, in: Estuar. Coast. Model., American Society of Civil Engineers, Reston, VA, 399–418. doi:10.1061/40876(209)23
- K.M. Dresback, R.L. Kolar, J.C. Dietrich (2005). On the Form of the Momentum Equation for Shallow Water Models Based on the Generalized Wave Continuity Equation: Conservative vs. Non-Conservative. Advances in Water Resources, 28(4), 345-358. doi:10.1016/j.advwatres.2004.11.011
- S. Tanaka, S. Bunya, J.J. Westerink, C. Dawson, R.A. Luettich, Scalability of an Unstructured Grid Continuous Galerkin Based Hurricane Storm Surge Model, J. Sci. Comput. 46 (2011) 329–358. doi:10.1007/s10915-010-9402-1