For general information, see the ADCIRC site, ADCIRC FAQ, or the ADCIRC Wikipedia page. For model documentation not yet available on the wiki, see the ADCIRC site. New content is being continuously added to the ADCIRCWiki, and material from the main ADCIRC site will be gradually transitioned over to the wiki.
NOLIFA is a parameter in the fort.15 file controlling the type of bottom stress parameterization used in a 2DDI ADCIRC run.
The following table is a summary of possible NOLIBF values, description, details, and other necessary input parameters and files.
|NOLIBF Value||Description||Details||Other Required Inputs|
|0||linear bottom friction law||uses a spatially constant linear bottom friction, of dimensions [1/T]||FFACTOR|
|1||quadratic bottom friction law||can specify a spatially constant or spatially varying dimensionless coefficient, ; in which||FFACTOR|
|2||hybrid nonlinear bottom friction law||In deep water, the friction coefficient is constant and a quadratic bottom friction law results. In shallow water the friction coefficient increases as the depth decreases (e.g. as in a Manning-type friction law). The friction coefficient is determined as: FFACTOR=FFACTORMIN*[1+(HBREAK/H)**FTHETA]**(FGAMMA/FTHETA)||FFACTORMIN, HBREAK, FTHETA, FGAMMA|
In the NWP section, if the user selects quadratic_friction_coefficient_at_sea_floor, mannings_n_at_sea_floor, or chezy_friction_coefficient_at_sea_floor, then NOLIBF must be 1 (nonlinear friction formulation) since all those formulations are nonlinear. If the NOLIBF were anything other than 1, it is an error that will cause ADCIRC to stop.