For general information, see the ADCIRC site, ADCIRC FAQ, or the ADCIRC Wikipedia page. For model documentation not yet available on the wiki, see the ADCIRC site. New content is being continuously added to the ADCIRCWiki, and material from the main ADCIRC site will be gradually transitioned over to the wiki.
TAU0: Difference between revisions
Taylorgasher (talk  contribs) (still going) 
Taylorgasher (talk  contribs) (morer) 

Line 1:  Line 1:  
'''TAU0''' is an input in the [[fort.15 file]] that influences the degree of numerical diffusion in ADCIRC's governing equations. Specifically, it influences the weighting factor that determines the relative contribution of the primitive and wave portions of the the Generalized WaveContinuity Equation (GWCE). The weighting factor, <math>\tau_0</math>, is affected by values in both the [[fort.15 file]] and the [[fort.13 file]], if the [[primitive weighting in continuity equation]] or [[min and max primitive weighting in continuity equation]] nodal attributes are specified. This page addresses both the TAU0 value in the fort.15 file and the <math>\tau_0</math> parameter more generally.  '''<code>TAU0</code>''' is an input in the [[fort.15 file]] that influences the degree of numerical diffusion in ADCIRC's governing equations. Specifically, it influences the weighting factor that determines the relative contribution of the primitive and wave portions of the the Generalized WaveContinuity Equation (GWCE). The weighting factor, <math>\tau_0</math>, is affected by values in both the [[fort.15 file]] and the [[fort.13 file]], if the [[primitive weighting in continuity equation]] or [[min and max primitive weighting in continuity equation]] nodal attributes are specified. This page addresses both the <code>TAU0</code> value in the fort.15 file and the <math>\tau_0</math> parameter more generally.  
==  == <code>TAU0</code> Values ==  
Because the TAU0 value specified in the fort.15 file can be either a flag (indicating how ADCIRC should operate) or the actual <math>\tau_0</math> value used in solving the GWCE, it is important to distinguish between the two. All negative  Because the <code>TAU0</code> value specified in the fort.15 file can be either a flag (indicating how ADCIRC should operate) or the actual <math>\tau_0</math> value used in solving the GWCE, it is important to distinguish between the two. All negative <code>TAU0</code> are flags, all positive <code>TAU0</code> are <math>\tau_0</math>. The following table is a summary of possible <code>TAU0</code> values and their meaning. Note that for <code>TAU0 = x.1</code> where <code>x</code> is an integer, behavior is the same as <code>x</code>, but the <math>\tau_0</math> values are written to the [[fort.90 file]]. More on this below in [[TAU0#OutputtingOutputting]].  
{ class="wikitable"  { class="wikitable"  
! style="fontweight:bold;"  fort.15 TAU0  ! style="fontweight:bold;"  fort.15 <code>TAU0</code>  
! style="fontweight:bold;"  >=0  ! style="fontweight:bold;"  >= 0  
! style="fontweight:bold;"  1  ! style="fontweight:bold;"  1  
! style="fontweight:bold;"  2  ! style="fontweight:bold;"  2  
Line 64:  Line 64:  
 0.002   0.002  
 N/A   N/A  
 Tau0FullDomainMin   <code>Tau0FullDomainMin</code>  
 N/A   N/A  
 N/A   N/A  
Line 73:  Line 73:  
 1   1  
 0.2   0.2  
 Tau0FullDomainMax   <code>Tau0FullDomainMax</code>  
 0.2   0.2  
 0.2   0.2  
Line 79:  Line 79:  
! colspan="8" style="textalign: center; fontweight:bold;"  Code Flags  ! colspan="8" style="textalign: center; fontweight:bold;"  Code Flags  
    
! style="fontweight:bold;"  HighResTimeVaryingTau0  ! style="fontweight:bold;"  <code>HighResTimeVaryingTau0</code>  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
Line 88:  Line 88:  
 style="backgroundcolor:#ffce93;"  .TRUE.   style="backgroundcolor:#ffce93;"  .TRUE.  
    
! style="fontweight:bold;"  FullDomainTimeVaryingTau0  ! style="fontweight:bold;"  <code>FullDomainTimeVaryingTau0</code>  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
Line 97:  Line 97:  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
    
! style="fontweight:bold;"  TimeAveragedTau0  ! style="fontweight:bold;"  <code>TimeAveragedTau0</code>  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
Line 106:  Line 106:  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
    
! style="fontweight:bold;"  BackLoadedTimeAveragedTau0  ! style="fontweight:bold;"  <code>BackLoadedTimeAveragedTau0</code>  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
 style="backgroundcolor:#fffc9e;"  .FALSE.   style="backgroundcolor:#fffc9e;"  .FALSE.  
Line 117:  Line 117:  
'''Positive values'''<br/>  '''Positive values'''<br/>  
For all positive values, the value specified in the fort.15 file is spatially and temporally constant and applied directly:  For all positive values, the value specified in the fort.15 file is spatially and temporally constant and applied directly, i.e. <code>TAU0 = <math>\tau_0</math></code>, so:  
*= 0, the GWCE is a pure wave equation  *<code>TAU0 = 0</code>, the GWCE is a pure wave equation  
*= 1, the GWCE behaves like a pure primitive continuity equation  *<code>TAU0 = 1</code>, the GWCE behaves like a pure primitive continuity equation  
*0 < TAU0 < 1, the GWCE is a weighted sum of the primitive and wave portions of the equation  *<code>0 < TAU0 < 1</code>, the GWCE is a weighted sum of the primitive and wave portions of the equation  
'''Negative Values'''<br/>  '''Negative Values'''<br/>  
''Spatially varying, temporally constant''  ''Spatially varying, temporally constant''  
*= 1, <math>\tau_0</math> is spatially varying but constant in time; it is calculated according to depth as follows:  *<code>TAU0 = 1</code>, <math>\tau_0</math> is spatially varying but constant in time; it is calculated according to depth as follows:  
**If  **<code>If depth >= 10; <math>\tau_0</math> = 0.005</code>  
**If  **<code>If depth < 10; <math>\tau_0</math> = 0.020 </code>  
*= 2,  *<code>TAU0 = 2</code>, <math>\tau_0</math> is spatially varying but constant in time and calculated according to depth as follows:  
**If  **<code>If depth >= 200; <math>\tau_0</math> = 0.005</code>  
**If  **<code>If 1 < depth < 200; <math>\tau_0</math> = 1/depth</code>  
**If depth < 1  **<code>If depth < 1; <math>\tau_0 = 1</math></code>  
''Spatially and temporally varying''<br/>  ''Spatially and temporally varying''<br/> 
Revision as of 17:06, 18 February 2019
TAU0
is an input in the fort.15 file that influences the degree of numerical diffusion in ADCIRC's governing equations. Specifically, it influences the weighting factor that determines the relative contribution of the primitive and wave portions of the the Generalized WaveContinuity Equation (GWCE). The weighting factor, , is affected by values in both the fort.15 file and the fort.13 file, if the primitive weighting in continuity equation or min and max primitive weighting in continuity equation nodal attributes are specified. This page addresses both the TAU0
value in the fort.15 file and the parameter more generally.
TAU0
Values
Because the TAU0
value specified in the fort.15 file can be either a flag (indicating how ADCIRC should operate) or the actual value used in solving the GWCE, it is important to distinguish between the two. All negative TAU0
are flags, all positive TAU0
are . The following table is a summary of possible TAU0
values and their meaning. Note that for TAU0 = x.1
where x
is an integer, behavior is the same as x
, but the values are written to the fort.90 file. More on this below in Outputting.
fort.15 TAU0

>= 0  1  2  3  5  6  7 

Varies in space  no  yes  yes  yes  yes  yes  yes 
Varies in time  no  no  no  yes  yes  yes  yes 
Spaceaveraged  no  no  no  yes  yes  yes  yes 
Timeaveraged  no  no  no  no  no  yes  yes 
Requires nodal attribute  no  no  no  yes  no  yes  no 
Minimum  N/A  0.002  0.002  N/A  Tau0FullDomainMin

N/A  N/A 
Maximum  N/A  0.005  1  0.2  Tau0FullDomainMax

0.2  0.2 
Code Flags  
HighResTimeVaryingTau0

.FALSE.  .FALSE.  .FALSE.  .TRUE.  .FALSE.  .TRUE.  .TRUE. 
FullDomainTimeVaryingTau0

.FALSE.  .FALSE.  .FALSE.  .FALSE.  .TRUE.  .FALSE.  .FALSE. 
TimeAveragedTau0

.FALSE.  .FALSE.  .FALSE.  .FALSE.  .FALSE.  .TRUE.  .FALSE. 
BackLoadedTimeAveragedTau0

.FALSE.  .FALSE.  .FALSE.  .FALSE.  .FALSE.  .FALSE.  .TRUE. 
Positive values
For all positive values, the value specified in the fort.15 file is spatially and temporally constant and applied directly, i.e. TAU0 =
, so:
TAU0 = 0
, the GWCE is a pure wave equationTAU0 = 1
, the GWCE behaves like a pure primitive continuity equation0 < TAU0 < 1
, the GWCE is a weighted sum of the primitive and wave portions of the equation
Negative Values
Spatially varying, temporally constant
TAU0 = 1
, is spatially varying but constant in time; it is calculated according to depth as follows:If depth >= 10; = 0.005
If depth < 10; = 0.020
TAU0 = 2
, is spatially varying but constant in time and calculated according to depth as follows:If depth >= 200; = 0.005
If 1 < depth < 200; = 1/depth
If depth < 1;
Spatially and temporally varying
 = 3, varies in space and time. is computed from TAU0Base (read in from the nodal attribute file) as follows:
 If TAU0Base < 0.025; = TAU0Base (constant in time)
 If TAU0Base >= 0.025; = TAU0Base + 1.5 TK(i) where TK(i)=CdU/H
 = 5, FullDomainTimeVaryingTau0 is set to .True. and is dependent on the local friction as follows:
 =Tau0Min+1.5*TK(i)
 It is limited to a range specified by Tau0FullDomainMin and Tau0FullDomainMax, which are specified on the following line of the fort.15 file when TAU0 is 5
Spatial and Temporal Updating
For TAU0=3, 5, 6, or 7
, is updated in space and in time.
Outputting
For TAU0 formulations that vary spatially or temporally, ADCIRC can output the internallycalculated nodal values. They are written to the fort.90 file, which has the same format and output frequency as the water surface elevation output file (fort.63). fort.90 output is activated by placing a 1 in the tenths place of TAU0 in the fort.15 file. For example, if TAU0=3.1, the calculation of is still carried out according to the description of TAU0=3 above, and the fort.90 output file will also be produced.
Selecting
For positive values (TAU0=), a good rule of thumb for setting TAU0 is to set it equal to the largest value of an equivalent linear friction factor (e.g, for linear friction TAU0 = TAU; for quadratic friction TAU0 = maximum (speed*CF/depth). Typical values for TAU0 are in the range of 0.005 – 0.1.
TAU0 = 3, paired with the primitive weighting in continuity equation nodal attribute is generally the most popular formulation. In this case, TAU0Base nodal attribute values can be generated with the ADCIRC utility program tau0_gen.f. The program bases generation on the following logic:
 If the avg. distance between a node and its neighbors < 1750 m TAU0Base = 0.03
 If the avg. distance between a node and its neighbors > 1750 m AND depth < 10m; TAU0Base = 0.02 (TAU0 is constant in time)
 If the avg. distance between a node and its neighbors > 1750 m AND depth > 10m; TAU0Base = 0.005 (TAU0 is constant in time)